2024 MASABA 6X20TD

2024

0

2024332

New

10065

Masaba Chassis: Portable 6x20TD Screen over Twin 36” Wash Plant • Triple Axle Chassis – Constructed of heavy-duty wide flange beam • Heavy-Duty 25,000 lb. Leaf Spring Suspension – With (12) 11R x 22.5 radial tires • Brake Package – Air brakes, emergency valve and plumbing • Light Package – Brake and directional signals • Mud Flaps • Landing Jacks – Qty. (2) crank down jacks at king pin end of chassis • Slurry Box – Constructed of 1/4” mild steel, with (3) adjustable spray bars, folds for transport, slurry box with sloped back & front discharge onto screen feeder • Gate Valve – To balance flow between screws • Crossover Inlet – Inlet pipe running across the machine to attach inlet line from either side, includes (1) cap plate. • Rollaway Screen Overs Chutes – Constructed of 1/4” mild steel with top and middle deck blending gates, manually rollaway for maintenance • Qty. (2) 24” Cross Conveyors – Reversible. With Dodge TAII#2 reducers, WEG 7.5hp motor, PPI CEMA B idlers, and 220 2-ply belt with mechanical splice • Under Screen Flume – Constructed of ¼” mild steel, with (2) rinse bars • Catwalk & Ladder – Diamond plate flooring with bolt-on handrail, knee rail, and kick plate on three sides of screen, extends past screen next to discharge chutes, per side. (1) Aluminum access ladder. Self-closing safety gates at catwalk access points. • (4) Hydraulic Jack Mounting Plates – Mounted to plant for future use, less jacks • Cord Wrap • Aluminum Toolbox – With hinged lockable door • Guarding – Tail pulley guard, v-belt guard, and nip guard on head pulley. We do not guarantee that our guards meet all local codes. It is the owner’s responsibility to have them inspected locally. • Steel Shot Blasted • Primer – (1) coat of 2-part urethane primer • Paint – (1) coat of 2-part urethane paint • Owner’s Manual – (1) copies in English for maintenance and parts • Standard Paint Options (Please choose one) o Beige (RAL 1015) o Red vinyl stripe • Guard Paint Color o Safety Yellow (RAL 1012) Options (included) • Switchgear – With NEMA 4 enclosure, breakers, reversing starts for cross conveyors three position start/stop pushbuttons, main disconnect, emergency stop, two extra #2 starters for 20hp off-plant motors, VFD for Screw, panel stand, and a 100’ lead cord • Hydraulic Power Unit – With pump, reservoir, filter, valve body, and plumbing to operate all hydraulic accessories • Hydraulic Lifting Jacks – Qty. (4) Masaba lift-only jacks • Hydraulically Raise/Lower Slurry Box – Power unit not included • Manual Service Tie-Off Cable – Over top deck, lower for travel • Vulcanized Belts – Includes (2) 24” cross conveyors • Catwalk Step Over at Screen Motor – With maintenance access point, ladder style • Rollaway Chute Upgrade – ¼” mild steel with ¾” UHMW liners • Slurry Box Upgrade – 1/4” mild steel with ¾” UHMW liners • 3/4” UHMW Liners – Placed in flume METSO Triple Shaft Elliptical Screen – 6x20 TD • Triple Shaft Screen considered at 0 degree for operation as standard • Coil Springs and dampers • 5/16” Thick Side Plates with Huck Bolt Construction • Side Tension decks with seal strips for 4’ screen panels • Heavy Duty Tube Steel Decks with Herringbone Cross Bracing • Vibrating Mechanism (160mm bearings) with Oil lubrication • Carriage Bolts used to retain clamp bars – Standard is 4’ long bars / 5 ft available upon request • AR lined Feedbox and AR lined Discharge Lip • Right hand variable speed drive standard with motor mount and belt guard and tensioning device • Hand access on triple deck screens. Spray Bar knockouts, bottom deck Feed end curtain • Less Motor, less base frame • Machine painted per Metso Standard Grey Paint / Metso Beige color per special request • Hand of drive is Right Hand unless specified on PO for Left Hand Drive • Top Deck: Medium Scalper Deck – includes heavy duty side tension top deck, heavier feedbox liner and heavier top disharge lip. Also includes side extension wear liners along the screens sides and feedbox perimter. o Medium Scalper Deck only – includes heavy duty side tension top deck, heavier feedbox and discharge lip liner. o Side Extension Wear Liners along the side sheets o Wear Liners along the feedbox perimeter • Middle Deck: Side Tension Single Crown Deck, Standard • Bottom Deck: Side Tension Single Crown Deck, Standard • Spray System: Complete spray system – includes manifold with ball valves, flexible hosing, spray pipes and spray pipe supports • Motor: 40HP, 60HZ/3P/460V, 1200 RPM • Feedboox rubber liner: 1” thick steel backed rubber • Discharge lip rubber liner: 1” thick steel backed rubber, all decks McLanahan Fine Material Double Screw Washer – 36” x 25’ • Fabricated steel Washer Box, ribbed and flanged for stiffness and rigidity • Adjustable overflow weirs on sides and end • Removable baffle plate in front of pool area • Rising current water manifold inlets beneath the pool area • Extra heavy steel pipe shafts flanged at both ends • Spiral steel screw flights welded to shafts • Renewable hard white iron wearing shoes bolted to screw flights • Twin Seal Pak bearing package units at feed end • Self-aligning, anti-friction roller bearings at discharge end • Shaft mounted reducer gearboxes • Adjustable motor bases, motor sheaves, V-belts and drive guards • Bolt on discharge chute • 2 x 15HP high torque, NEMA -B TEFC Electric Motor